SONY DVW 500P Digital Betacam Recorder (PAL)

The Hi5-3D supports, depending on the video format, “side-by-side”, “top-bottom”, and “frame-packing” 3D modes. The “side-by-side” and “top-bottom” modes involve compressing, either horizontally or vertically, each input for combining into a single video stream at the same rate of the inputs. The “frame-packing” mode stacks two full resolution inputs into a “tall” frame (at twice the clock and line rates). When selected, “frame-packing” can only be used with 23.98 or 24 input frame rates.

Each input, in addition to 3D processing, can be flipped either horizontally, vertically, or both. This control is provided by 4 switches that can be engaged in any combination.

The Hi5-3D supports both DIPswitch control and host control via the Mini-Config application. One of the DIP switches is a “Local/Remote” switch. When in the “Local” mode, the remaining DIP switches support a subset of the user controls. When in the “Remote” mode, AJA’s Mini-Config application controls the unit. The last configuration is held in memory on the Hi5-3D for use when disconnected.

The Hi5-3D works with both 2D and 3D inputs. When in the 2D mode, the input is simply passed to the output unmodified. In the 3D mode, the Hi5-3D supports the minimum required 3D modes as defined by the CEA for HDMI 1.4a televisions.

CEA Required 3D modes:

“PsF” inputs are converted to “p” for HDMI output. The SDI output can support S/S and T/B formats only. Future software versions may add other formats.

• HD-SDI to HDMI 1.4a with additional SDI output
• 10-bit HDMI v1.4a support including 3D and embedded audio
• Additional 2-Channel RCA audio output
• Setup via DIP switch or PC/Mac using USB port and supplied USB cable (Mini-Config software application supplied on CD)
• Uses 5-20V power supply
• Five year warranty

AJA’s free Mini-Config software can be used with any USB-enabled AJA Mini-Converter and provides an easy-to-use graphical interface with detailed information about the current input and output formats. Control all the parameters of any supported AJA Mini-Converter as well as loading firmware updates from AJA that add new features and functionality.

All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.

AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can’t accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.

All AJA Mini-Converters are covered by a five year warranty and AJA’s advanced replacement policy. If a replacement is necessary, AJA will ship a new unit immediately without the need to send the original unit back first, ensuring you are up and running again as quickly as possible.